Product NewsFLASH


                              July 2019 | Product and solution news from CommScope

                              ENTERPRISE NETWORKS

                               

                              Eliminate transition point concerns with CommScope’s indoor/outdoor plenum copper cable

                              Region: U.S. and Canada
                              CommScope’s new indoor/outdoor copper cables include Categories 6A and 6 plenum options, which eliminates traditional transition points from outdoor cable to safety listed indoor cables. Local building codes typically require outside plant cables to transition to indoor safety listed cables within 50 feet of entry into a building. The indoor/outdoor plenum cables by CommScope solve this issue, resulting in:

                              • Greater design freedoms by not having to locate and create a transition point
                              • Cost savings in reduced labor and materials
                              • Only 1 cable to buy or inventory to serve these applications

                              Typical applications are in slab or below grade conduits, which in most cases are considered wet locations—not acceptable for traditional indoor cables that are not designed to withstand moisture. This new design performs in both environments, protecting your network infrastructure integrity for peak performance, while significantly saving costs and time of installations.

                              Product References:
                              Category 6A Indoor/Outdoor Plenum Cable
                              Category 6 Indoor/Outdoor Plenum Cable

                              WIRELESS NETWORKS

                               

                              Ultra-wideband tappers for DAS network testing

                              Region: Global
                              CommScope ultra-wideband tappers support a frequency range from 340 to 6000 MHz. Tappers are cost-effective signal samplers typically used for testing in DAS networks. They operate similarly to directional couplers but have larger bandwidths, capacitive coupling and lower isolation than a directional coupler. The new ultra-wideband models support frequency bands being deployed for private LTE, CBRS and sub-6 GHz 5G. A range of models is available to support needed signal strengths and connector types.

                              Product References:
                              Ultra-wideband Tappers


                              Sentinel? SHP Microwave Antenna Portfolio Expands to Include 1.2 m (4 ft)

                              Region: Global
                              The Sentinel SHP product family has been expanded to include SHP4 single polarized antennas. These antennas typically meet ETSI Class 4 and FCC Category A radiation pattern envelop masks, together with compliance to ETSI Category 3 for high cross polar discrimination. Available with standard waveguide flange outputs or with direct radio integrations, these new antennas offer maximum utilization of backhaul spectrum and protection against network interference.

                              Product References:
                              SHP4-6W
                              SHP4-7W
                              SHP4-11W
                              SHP4-13W

                              Additional References:
                              Microwave Backhaul Solutions


                              Sentinel? SHPX Microwave Antenna Portfolio Expands to Include 1.2 m (4 ft)

                              Region: Global
                              The Sentinel SHPX product family has been expanded to include SHPX4 dual polarized antennas. These antennas typically meet ETSI Class 4 and FCC Category A radiation pattern envelop masks, together with compliance to ETSI Category 3 for high cross polar discrimination. Available with standard waveguide flange outputs or with direct radio integrations, these new antennas offer maximum utilization of backhaul spectrum and protection against network interference.

                              Product References:
                              SHPX4-6W
                              SHPX4-7W
                              SHPX4-11W
                              SHPX4-13W

                              Additional References:
                              Microwave Backhaul Solutions


                              USX10 Microwave Antennas Support ETSI Classes 3 and 4

                              Region: Global
                              The popular USX portfolio of ultra-high performance microwave antennas has been expanded with the release of the USX10 series. These antennas typically meet ETSI Class 4 and FCC Category A radiation pattern envelope masks, together with compliance to ETSI Category 3 for high cross polar discrimination. Available as dual polarized antennas with standard waveguide flange outputs, these antennas ship with 2-piece reflectors to minimize shipping volumes. In common with all the USX series, these new antennas offer maximum utilization of backhaul spectrum and protection against network interference.

                              These antennas can be upgraded from the standard 200 km/h survival to 250 km/h with an additional high wind upgrade kit.

                              Product References:
                              USX10-3
                              USX10-4
                              USX10-6W
                              USX10-7W
                              USX10-11W
                              USX10-13W

                              Additional References:
                              Microwave Backhaul Solutions


                              USX12 Microwave Antennas Support ETSI Classes 3 and 4

                              Region: Global
                              The popular USX portfolio of ultra-high performance microwave antennas has been expanded with the release of the USX12 series. These antennas typically meet ETSI Class 4 and FCC Category A radiation pattern envelope masks, together with compliance to ETSI Category 3 for high cross polar discrimination. Available as dual polarized antennas with standard waveguide flange outputs, these antennas ship with 2-piece reflectors to minimize shipping volumes. In common with all the USX series, these new antennas offer maximum utilization of backhaul spectrum and protection against network interference.

                              These antennas can be upgraded from the standard 200 km/h survival to 250 km/h with an additional high wind upgrade kit.

                              Product References:
                              USX12-3
                              USX12-4
                              USX12-6W
                              USX12-7W
                              USX12-11W

                              Additional References:
                              Microwave Backhaul Solutions


                              HX10 Microwave Antennas Support ETSI Class 3

                              Region: Global
                              The popular HX portfolio of high performance microwave antennas have been expanded with the release of the HX10 series. These antennas typically offer ETSI Class 3 and FCC Category A radiation pattern envelope compliance, together with ETSI Category 2 compliance for 33 dB cross polar discrimination. Available as dual polarized antennas with standard waveguide flange outputs, these antennas ship with 2-piece reflectors to minimize shipping volumes. These antennas can be upgraded from the standard 200 km/h survival to 250 km/h with an additional high wind upgrade kit.

                              Product References:
                              HX10-4
                              HX10-6W
                              HX10-7W
                              HX10-11W
                              HX10-13W

                              Additional References:
                              Microwave Backhaul Solutions


                              HX12 Microwave Antennas Support ETSI Class 3

                              Region: Global
                              The popular HX portfolio of high performance microwave antennas have been expanded with the release of the HX12 series. These antennas typically offer ETSI Class 3 and FCC Category A radiation pattern envelope compliance, together with ETSI Category 2 compliance for 33 dB cross polar discrimination. Available as dual polarized antennas with standard waveguide flange outputs, these antennas ship with 2-piece reflectors to minimize shipping volumes. These antennas can be upgraded from the standard 200 km/h survival to 250 km/h with an additional high wind upgrade kit.

                              Product References:
                              HX12-4
                              HX12-6W
                              HX12-7W

                              Additional References:
                              Microwave Backhaul Solutions

                              WIRELINE NETWORKS

                               

                              New Node Service Cable Assemblies

                              Region: Global
                              CommScope has expanded the fiber drop cable assembly portfolio to include node service assemblies. These products are designed to provide fast installation of an optical node via splicing in a closure and transitioning into a node. Configurable options include: 6- and 12-fiber counts, standard dielectric and armored cable, connector variations between SC and LC, and different breakout lengths. A limited release of configurations is presently offered (see link below) and additional variants will be released in the near future.

                              Product References:
                              Node Service Cable Assemblies

                               

                              Product NewsFLASH Archives

                              米奇影院